Circuit Performance CP24 15×8 Gloss Black/Machined 4×100 [+25mm]

This is a Circuit Performance CP24 Wheel. It’s got a 15 inch diameter, 8 inch width, a 4×100 bolt pattern and an offset of +25mm

• Classic Style Work Equip 03 Replica Rims
• 3.75″ Machined step lip, a very generous size for a wheel with this high of an offset
• Compatible with all 0.453″ valve stems and TPMS sensors
• Lug seating for tuner style lug nuts, with a 60 degree conical base

Circuit Performance CP24 Wheels offer a classic Equip 03 style mesh spoke with a deep stepped lip design. A classic JDM style that looks great on a wide range of 4×100 vehicles.

Design

The Circuit Performance CP24 has styling similar to Work Equip 03 rims, a classic JDM wheel with roots dating back to the 1970s and 1980s. It’s a timeless design that’s been around for decades and isn’t going out of style anytime soon. It’s unique because the 4 lug holes are integrated in the mesh-spoke design rather than a traditional circular lug pocket. The center of the rim is finished off nicely with a flush mount Circuit Performance logo center cap, included with each wheel.

Fitment

This wheel is a single-drilled 4 Lug, so it will only fit vehicles with a 4×100 bolt pattern. It’s 15×8 which means it has a 15″ diameter and an 8″ width. The offset is +25mm which means the mounting pad is 25mm forward of the centerline of the wheel. The centerbore in the back of the wheel is 73.1mm, so it can easily be hub centric to any vehicle by using a hub centric ring during installation. It is a great size for most 4×100 vehicles because it has a flush fitment without being overly aggressive.

Finish

This wheel features a two-tone black and machined finish which has a high gloss clear coat. The wheel is painted black, before the face of the wheel is machined to a natural aluminum reflective surface on the entire front face of the rim. The perimeter of the wheel has 16 black rivets permanently bonded to the wheel, which gives the wheel a 2 piece look. The 3.75″ stepped lip is machined to a highly reflective shine, and clear-coated for protection so it will not require re-polishing or re-plating.

Our Take

CP24 Wheels are one of our favorite old school JDM style wheels and look amazing on so many 4×100 sport compact cars. It weighs in at just under 15 lbs, so it’s fairly lightweight for its class, and like all Circuit Performance wheels, it’s built to withstand daily street use and performs just as well at the track. 15×8 +25 is a great size for most 4×100 vehicles to give a flush fitment, without being overly aggressive. If you’re running a widebody or fender flares, you may want a lower offset wheel but for most stock body 4 lug sport compacts, the size is perfect. Note that the wheel is only offered in 15×8, so these are great for those looking to run a square setup, with the same size wheels in the front and rear of the vehicle. Staggered fitments aren’t currently available in this wheel style. The two-tone black and machined center is the most popular colorway for this wheel style, and contrasts nicely with the bright machined lip and the 4 hole lug area is uniquely integrated into the mesh-spoke design which is a really neat feature of this wheel.

This wheel is ideal for 4×100 Honda Civic (EF/EG/EK/EP), Acura Integra (DA/DC2), Mazda Miata (NA/NB), BMW (2002/E30),