Circuit CP42 15×7 Gloss Gunmetal 4×100 [+35mm] v2 Updated 2024 Model

This is a Gloss Gunmetal Circuit CP42 Wheel. It’s got a 15 inch diameter, 7 inch width, a 4×100 bolt pattern, and an offset of +35mm. This updated v2 is new for 2024 with a new OEM style paint matched flat center cap and a Gloss Gunmetal Finish.

• Inspired by the USDM ITR Integra Type R and JDM EK9 CTR Wheel
• OEM + Fitment, with slight refinements and adjustments
• Compatible with all 0.453″ valve stems and TPMS sensors
• Lug seating for tuner style lug nuts, with a 60 degree conical base

Design

The Circuit CP42 is a tribute to one of the most iconic wheel designs of the 90s. This new release captures the unmistakable style that defined an era, blending nostalgia with modern styling. Designed for the true enthusiasts who grew up admiring this cult classic, the CP42 offers a fresh take on a timeless design.

Fitment

Our OEM Plus approach takes the classic look of original wheel and refines it with modest adjustments to fitment for an improved stance and improved aesthetics. The original JDM CTR/USDM ITR wheel was offered in 15×6, with a really high +50mm offset. We added an inch of width and lowered the offset to +35mm for a slightly more modern flusher fit. By retaining the original wheel profile, with a slightly wider and lower offset fitment, we’ve created a wheel that looks right at home on your car while standing out in all the right ways. Perfect for those who value heritage, authenticity and performance.

This wheel is single-drilled 4 Lug, so it will only fit vehicles with a 4×100 bolt pattern. It’s 15×7 which means it has a 15″ diameter and a 7″ width. The offset is +35mm which means the mounting pad is 35mm forward of the centerline of the wheel. The centerbore in the back of the wheel is 73.1mm, so it can easily be hub centric to any vehicle by using a hub centric ring during installation. It’s a great fit on a wide range of Honda And Acura vehicles including Integra, Civic, Fit, and Insight.

Finish

This wheel features a gloss gunmetal finish that has a high gloss clear coat. It’s subtle, sporty and classy. It strikes a perfect balance between modern elegance and retro charm.

Centercap

The v2 CP42 wheel includes a paint matched flush mount blank center cap that can easily be customized. Many of our customers choose to overlay an emblem or logo with vinyl to complete the OEM look. The iconic “H” or “A” emblems are trademarks of Honda/Acura so we are unable to provide these, but a deep red vinyl overlay can easily be applied.